http://www.popsci.com/breakdown/article/2008-11/
physics-surfing-part-two-tubes-and-barrels
Enlarge to full screen
Catching the biggest waves takes some work
Posted
10.29.2008
There are few
things more impressive than watching a big-wave surfer dropping into a
monstrous "bomb" 60 or 70 feet high. Actually doing it must be quite
an adrenaline rush. (I've been out in waves maybe a fifth that size and even
then the energy of the wave can be, well... terrifying!) In the video we can
see that the surfer gets towed into the wave with the aid of a jet ski. If
you're familiar with surfing you might be aware that once waves get big enough
(wave faces larger than 40 or 50 feet) it's impossible to paddle into them in
the "traditional" way: you have to be towed in. Why is this? Not
surprisingly, it all has to do with some basic principles of physics.
Let's examine
the physics of this particular aspect of surfing -- the takeoff or the
"drop-in". How do you catch the wave? Waves coming in to shore from
the open ocean have speeds that can vary from 8 to 10 miles per hour for
smaller waves to up to 35 miles per hour for a tow-in-sized wave. In order to
catch the wave, you must paddle in front of it with sufficient speed that the
wave does not pass right under you.
But paddling
by itself doesn't get you into the wave, because you actually cannot paddle as
fast as the wave is moving, and you need to match the speed of the wave if you
want to ride with it. In order to catch up to that wave speed, it's necessary
to use the gravitational potential energy of the wave. The trick is to obtain
sufficient speed by paddling that, as the wave travels under you, your board
begins to fall down the face. As you drop down the front of the wave, the
gravitational potential energy you gain is converted into kinetic energy. Soon
you are travelling as fast as the wave. In fact, if you continue to drop to the
bottom of the wave, you'll be moving faster than the wave -- and if you don't
cut into the face, you might temporarily outrun it.
We can use
conservation of energy to calculate the approximate speed of a surfer as he
hits the bottom of the wave just after take-off:
KEbottom = PEtop + KEtop
Or,
1/2mvs2 = 1/2mvw2 + mgh
Where vs is the speed of the surfer at the bottom of the wave, vw is the speed of the wave and h is the wave
height. We are also assuming no significant loss of energy due to friction
between the board and the water.
So why is it
impossible to paddle in to a wave if it's too big? Big waves move faster, and
that giant you're trying to catch up with is just moving too darn fast. You
simply cannot generate enough paddling speed to get into the wave before it
passes by. You need a jet ski to get the speed you need.
Finally let's
calculate about how fast you would be going after dropping into a 70-foot monster
wave. Solving the above equation for a wave speed of 35 miles per hour and a
wave height of 70 feet, we find that you will hit the bottom at a whistling 57
miles per hour. Now you just have to pull off the turn, avoid the grinding lip,
carve a "cutback" if you can, and hope the wave doesn't "close
out" and drag you 300 yards under an avalanche of whitewater.